Tips & tricks
How to participate in the Sidemen giveaway? How to set custom DNS on any device How to collect diagnostics from any device Common terms used in the VPN world How to clear cache Vodafone and BT networks How to take a screenshot on almost any device How to take a screenshot on Windows How to send a screenshot to our Support Team
  1. Surfshark Customer Support
  2. VPN Guides
  3. Surfschool
  4. Tips & tricks

How to set custom DNS on AsusWRT or Asus Merlin routers

Updated:

In this tutorial, you will learn how to configure custom DNS addresses on your AsusWRT or Asus Merlin routers in a few simple steps.


For this tutorial, you will need a router running AsusWRT or Asus Merlin firmware and an active Surfshark subscription. You can find the available plans on Surfshark’s pricing page.

 

Check the following steps:

  1. Open a browser and type in the Default Gateway address into your browser's URL address bar. In most cases, by default, it is 192.168.1.1

    NOTE: Your router might have a different Default Gateway IP address. Check the backside of your router to find the Default Gateway IP address of your particular router.

  2. You will see the login prompt. If you have never configured your router before, the credentials should be admin/admin or admin without a password.

    You can also check the back of your router for the default credentials.
    Asusdns1.jpg

  3. Once you log in, click on the WAN tab in the Advanced Settings section.
    Asusdns2.jpg

  4. You will find the WAN DNS Settings tab there. Press on the NO option next to Connect to DNS server automatically.
    .jpg

  5. In the DNS Server1 and DNS Server2 tabs, enter the following DNS addresses:

    162.252.172.57
    149.154.159.92
    Asusdns4.jpg

  6. To save the changes, press Apply and restart your router.
    Asusdns5.jpg

 

 

 

You may also be interested in:

Was this article helpful?
Thank you for your feedback!