Tips & tricks
How to participate in the Sidemen giveaway? How to set custom DNS on any device How to collect diagnostics from any device Common terms used in the VPN world How to clear cache Vodafone and BT networks How to take a screenshot on almost any device How to take a screenshot on Windows How to send a screenshot to our Support Team
  1. Surfshark Customer Support
  2. VPN Guides
  3. Surfschool
  4. Tips & tricks

How to disable IPv6 on a Linux device

Updated:

This guide will show you how to disable IPv6 on a Linux operating system.


Follow these steps:

  1. Open the Terminal using the Ctrl+Alt+T keyboard shortcut. On the Terminal window, enter the following command:
    sudo nano /etc/sysctl.conf

    This command will open the sysctl.conf file in the Terminal.
    ipv6LINUX1.png

  2. Scroll down to the bottom of the sysctl.conf file and paste these lines:
    net.ipv6.conf.all.disable_ipv6 = 1
    net.ipv6.conf.default.disable_ipv6 = 1
    net.ipv6.conf.lo.disable_ipv6 = 1
    net.ipv6.conf.tun0.disable_ipv6 = 1

    ipv6LINUX2.png

  3. Save the changes by pressing Ctrl+O and Ctrl+X after that.

  4. Enter sudo sysctl -p to apply the changes in the sysctl.conf file.
    ipv6LINUX3.png

  5. Check the status of IPv6 by entering the following command in the Terminal:

    sudo cat /proc/sys/net/ipv6/conf/all/disable_ipv6

    If you see 1 as a reply, it means IPv6 is not running on your device anymore.
    ipv6LINUX4.png

 

 

You may also be interested in:

Was this article helpful?
Thank you for your feedback!